Xyzen Takeoff TESTVIEW-ONLY DEMOv0.1 TEST 2 · plan measurement for CEP

Open a PDF plan to start

Set the scale from a known dimension, then measure lengths, areas, counts and wall areas.
Each measurement gets a CEP item, so the quantities go straight to CEP, Enterprise and the Suite.

Works offline. The plan never leaves this computer.

3D model TEST
Left-drag: orbit · right/middle-drag or Shift-drag: pan · wheel: zoom · click: select.
Quantities = the 2D takeoff (Totals). The 3D model only shows them.
Select100%

Calibrate this page

Tip: use the longest dimension you can find on the page. The longer the line, the more accurate the scale.

Set drawing scale

Only correct when the PDF is the true paper size of the drawing (not shrunk to fit). If unsure, use Calibrate on a known dimension instead.

3D sizes per CEP item

Used only to draw the 3D model (metres). They do not change any quantity. Heights are measured from the level (page) elevation.

Project Information

Shared with every Xyzen program through the .xyzen.json project file.